This is the Rat Bones, it's a 75mm frame in 1.5mm thick carbon fiber. The plate used is T300 with a Quasi-Isotropic lay-up....
Included is a set of M1.4 x 5mm motor screws as the Rat Bones is meant to be flown with prop guards, it's a Tiny Whoop! That's not to say it won't rip without, but they provide a good bit of protection to the frame as well as the props.
4X nylon M2x16mm screws are included for the flight controller to save some weight. They are intended to be cut down to size.
A 75mm Happymodel or Betafpv frame is also included to harvest the prop guards from. (I recommend mounting the Happymodel guards on top and the Betafpv guards on the bottom.)
A 3D printed TPU battery strap, 4 optional spacers and a 25 degree canopy that will fit most 14x14 cams.
Reach out if you have any comments or questions, thanks!
(For those of you working with just a few brain cells, the flight controller and cam is NOT included, thanks!)
